Understanding Organisations Essay Example | Topics and Well Written Essays - 1250 words

Understanding Organisations - Essay Example Understanding Organisations The firm was founded in 1903 by Henry Ford and since then it has manufactured a large number of commercial cars. Ford also manufactures luxury cars but they are marketed under the brand Lincoln. The chief executive of the company has taken measures since 2008 to simplify the fleet of all Ford cars across the world (Vlasic, 2008). The company has also shaped several automotive components. Ford Australia is an Australian subsidiary company of the original corporation. This subsidiary was founded in Geelong, Victoria in the early 1925. In May 2013 Ford president Bob Graziano has announced to cease the manufacturing process of the company in Geelong (Reuters, 2013). The industry for automobiles is highly competitive in nature in the current economic era. The establish firm of Ford has undergone certain losses since the last six years. The president claimed that the company’s manufacturing cost in Australia is extremely high when compared to that of Asia and Europe (News Geelong, 2 013). Thus, in order to reduce its costs and losses the company has decided to cease its operating plants in Geelong by 2016, as its fabrication in Geelong is not economically viable in the long run (Lambreth, 2007). The decision of Ford to cease its manufacturing unit in Geelong Australia may be actually beneficial to the economy of the country according to modernistic view (Goodwin and Wright, 2007). It is believed by many economists that the domestic economy of Australia would evolve as a result of the decision taken by Ford. Newscastle was another city that experienced a similar situation in 1999, when the city lost the BHP Steelworks. After BHP steel ceased its business in Newscastle, the city shifted its competences towards medical research, education and innovation. Thus the decision of BHP Steelworks was a blessing for Newscastle in 1999. It is thus felt that the people for Geelong should be optimistic regarding their future despite of experiencing a closure of Fords manufacturing and loss of employment opportunities. It is believed by the modernistic thinkers that this incident would help Geelong to carve new ways for improvements of in segments of the economy like academics and medical research. Though it is true that the loss of Ford business would render many individuals jobless but still according to the modern optimistic view the growth of other industries would surely generate more employment opportunities in Australia (Raschella, 2013). Environmental Impact The decision of Ford to cease its manufacturing division in Geelong would surely create a stressful atmosphere in its working environment. The closure of the factory was reported to cease 510 job losses in Fords Geelong engine plant (News Geelong, 2013). The president of the Australian branch of the company along with its CEO Bob Graziano stated that it was necessary to end the production unit of the company in Australia because the company faced a loss of almost $141 million in the recent financial years. Such situation would surely create an uncanny environment in the existing workplaces of the company. The existing workers would fear to lose their jobs in this crisis, when the company is facing severe financial instability. The employees would surely resist to the decision of manufacturing cease, as they would not want their jobs to be lost. Internal

Nintendo Reviving a Company Transforming a Market Case Study

Nintendo Reviving a Company Transforming a Market - Case Study Example Yes. Nintendo has tried its best to keep the game appealing for long. Nintendo put in vast sums of money to make sure Wii’s accomplishment does not disappear like many of the games consoles developed prior to this period. Nintendo created many games, for example, Zelda and Super Mario. Nintendo merged with two other corporations to guarantee new games string and launched games, for example, Capcom for the Wii gaming Console and Final Fantasy. The Wii is here to stay because the release of these games will go beyond appealing to gamers and raise the Wii’s impression to one dominating the industry. It is in the conclusion of the evolution stage and the start of the maturity stage. Nintendo is utilizing a superb marketing mix technique. This is because they have developed a famous product and are experiencing an immense growth. When the company’s growth started to stagnate, they started developing additional, innovative and creative product enhancements and features to keep clients fascinated. For example, it has introduced the steering wheel, balanced board, and competitors’ video games such as Monster Hunter and Final Fantasy series. The company is making correct decisions by innovating, inventing and intensifying the product. This will extend the deterioration of the product. Nintendo should look into the future before the Wii product finishes the maturity phase and moves into the waning phase. Nintendo will have to either add other dimensions of interactivity or contest with other superior products from other companies. The Wii should concentrate on targeting young children and hard core gamers. Nintendo should build on the motion-sensing control technology and basic graphics; this will fascinate any client. Nintendo should also concentrate on promotion, product, placement and price. The next product should provide different customizations and features and be a development on the previous product. The price should

Orthodontic Anchorage Unit Research Study

Orthodontic Anchorage Unit Research Study Chapter 3 MATERIALS AND METHODS A three-dimensional bone block model (Figure 2) integrated with a miniscrew was constructed with a computer-aided design program (SolidWorks; Dassault Systemes SolidWorks, Concord, Mass) to simulate a miniscrew implanted in bone as an orthodontic anchorage unit. Figure 2. Three dimensional bone block model with screw embedded. The bone block, consisting of cortical and cancellous bone, was constructed with dimensions of 20 mm. in length and width, and 15 mm. in height for evaluation. [1] The cortical bone thickness, elastic moduli, Poisson’s ratio, shear moduli and density of the edentulous maxillary and mandibular alveolar bone as shown on Table 2 was based on the studies of Dechow et al.[2] and Schwartz-Dabney and Dechow[3], respectively; and the dentate specimen based on the study of Peterson et al. [4] These were taken from specific locations of the edentulous maxillary and mandibular alveolar bone as shown in Figure 3. Since cancellous bone density was found to have little or no consequence to results obtained by previous studies[5], a fixed value will be set with elastic moduli of 1.3 GPa, Poisson’s ratio of 0.3, shear moduli of 2.0 and density 0.5g/cm3. Figure 3. Location from which cortical bone specimens were removed from the edentulous crania by Dechow et al.[6] and the edentulous mandibles by Schwartz-Dabney and Dechow[7] The miniscrew geometry was based on the MONDEAL system (MONDEAL Medical Systems, Muhlheim, Germany): ie, the screw thread profile was an isosceles triangle 0.4 mm in height and 0.16 mm along the base.[8] The thread pitch was 1.0 mm. These thread dimensions were fixed in all screw designs in this study. The miniscrew will be assumed to be homogeneous, isotropic and linearly elastic titanium alloy (Ti-6Al-4V) with elastic modulus of 114 GPa, Poisson’s ratio or 0.34 and Yield strength of 880MPa.[9] Table 2. Material properties of maxillary[10] and mandibular[11] alveloar cortical bone. The model was meshed automatically with 10-node tetrahedral solid elements. The interface between the cortex and the cancellous bone was assumed to be fully bonded; i.e., the elements were continuous, sharing the same nodes along the interface. A node-to-node contact condition was given on the interface between the miniscrew and the bone block to imitate a stage without osseointegration.[13] The static load along the x-axis was applied to the head of the miniscrew and perpendicular to its long axis to simulate the orthodontic force. For the nodes located on the 5 exterior surfaces of the bone block, all but the superior surface where the miniscrew entered was constrained in all degrees of freedom to simulate the boundary condition. The nodal solution of the von Mises stress in the bone and the displacement of the miniscrew were calculated for each model with the finite element analysis program.[14] To determine the loading effect, the maxillary and mandibular bone blocks will be subjected to four force magnitudes (1, 2, 4 and 6 N) and three force directions (60o , 90o and 120o) to mimic various clinical conditions. A force direction of 90o was the force perpendicular to the long axis of the miniscrew and parallel to the bone surface.[15] 2 N is the reported clinically safe limit for immediate loading.[16] The loads will be applied at the level of the eye of the screw meant for tying ligatures in a clinical situation.[17] To determine the screw size effect, three screw (outer) diameters (1.5, 2.0 and 2.3 mm.) and five screw length (7, 9, 11, 13 and 15 mm.). The screw length will be measured including the screw head, which had a 2 mm. height for all screw models. To simulate soft tissue thickness, various screw depths (screw length in the bone block) will be modelled.[18] For each screw length, the exposed screw length of 3, 4, 5 mm. will be measured. The von Mises stress and the displacement was determined for the different screw length, diameter and exposed screw length was subjected to the different force magnitude and direction. For every bone specimen there was 540 different scenarios. The stress distribution was then observed for the screws that exhibited the highest stress for each bone specimen and for each force direction. Chapter 5 SUMMARY OF FINDINGS, CONCLUSION AND RECOMMENDATIONS Summary of Findings There is no direct relationship between stress and displacement established. The pattern of the von Mises stress of miniscrews embedded on different bones are similiar with only minor differences. Whereas the maxillary edentulous specimens showing more displacement compared to its mandibular counterpart. Though the highest stress and highest displacement can be observed in 6 N of force at 90o direction at 5 mm. exposed length and the lowest stress and lowest displacement can be observed in 1 N of force at 1200 direction at 3 mm. exposed length. The stress is concentrated on the cortical bone irrespective of the screw length and the exposed screw length. It is more intensified at 5 mm exposed screw length because the moment of arm becomes longer, and lighter at 3 mm exposed length because the moment arm becomes shorter. The cortical bone acts as the fulcrum of the force. All miniscrews embedded in mandibular edentulous specimens were able to establish primary stability except for 2 scenarios in MDE4. 12-13% of miniscrews embedded on maxillary edentulous specimen were not able to establish primary stability. Majority of these occurred with screw diameter of 1.5 mm. (78 85%), exposed screw length of 5 mm. (61 72%), force magnitude of 6 N. (62 – 68 %), and force angle of 900 (40 45%). Conclusion Based on the data gathered, it is found that placement of orthodontic miniscrew on edentulous alveolar bone on both the maxilla and mandible is possible. The use of miniscrew with diameter of 2mm or wider embedding it on attached gingiva of 2mm or thinner, loading it with force 2 N or lower at an angle 60 or 1200 could increase chances of establishing primary stability. Recommendations The proponent of this research would like to recommend the implementation of a Randomized Controlled Trial based on the results of this study. This would ensure the evidence-based practice of the miniscrew anchorage. References [1] T. C. Liu and others, Finite Element Analysis of Miniscrew Implants Used for Orthodontic Anchorage, Am J Orthod Dentofacial Orthop, 141 (2012). [2] P. C. Dechow, Q. Wang, and J. Peterson, Edentulation Alters Material Properties of Cortical Bone in the Human Craniofacial Skeleton: Functional Implications for Craniofacial Structure in Primate Evolution, The Anatomical Records: Advances in Integrative Anatomy and Evolutionary Biology, 293 (2010). [3] C. L. Schwartz-Dabney and P. C. Dechow, Edentulation Alters Material Properties of Cortical Bone in the Human Mandible, J Dent Res, 81 (2002). [4] J. Peterson, Q. Wang, and P. C. Dechow, Material Properties of the Dentate Maxilla, Anat Rec A Discov Mol Cell Evol Biol, 288 (2006). [5] A. Gracco and others, Numerical/Experimental Analysis of the Stress Field around Miniscrews for Orthodontic Anchorage, Eur J Orthod, 31 (2009). [6] Dechow, Wang, and Peterson. [7] Schwartz-Dabney and Dechow. [8] Liu and others [9] Gerhard Welsch, R. Boyer, and E.W. Collings, Materials Properties Handbook: Titanium Alloys, (Asm International, 1994). [10] Dechow, Wang, and Peterson. [11] Schwartz-Dabney and Dechow. [12] Peterson, Wang, and Dechow. [13] Liu and others [14] Ibid. [15] Ibid. [16] A. G. Crismani and others, Miniscrews in Orthodontic Treatment: Review and Analysis of Published Clinical Trials, Am J Orthod Dentofacial Orthop, 137 (2010). [17] S. Singh and others, Three-Dimensional Finite Element Analysis of Strength, Stability, and Stress Distribution in Orthodontic Anchorage: A Conical, Self-Drilling Miniscrew Implant System, Am J Orthod Dentofacial Orthop, 141 (2012). [18] Liu and others

Importance of Worldviews Essay -- Cosgrove, Reality

Cosgrove describes a worldview as â€Å"a set of assumptions or beliefs about reality that affect how we think and how we live† (p. 19). A person’s worldview has been molded from the day they were born by family, friends, media, and even strangers. Worldviews are important because they allow us to â€Å"develop a deep comprehensive faith that will stand against the unrelenting tide of our culture’s non-biblical ideas† (Tackett). Our actions also tend to mimic our beliefs—for example, if you believe that there is life after death like Christians do, your priorities should reflect your dedication to follow Christ and not be of this world (John 15:19 NLT). As I have learned more and more about worldviews in this class, particularly a Christian worldview, I have the opportunity to look back on what my worldview was and how it has changed. Because I have grown up in a church, and been a Christian for as long as I can remember, I have always thought of myself having a Christian worldview. However, after this course, I have realized that I did not know some of the basic Christian foundations—I did know that God is the creator of all things and that he is and everything he did is love. In the church I learned God is loving, all-powerful, all-knowing, eternal, unchanging, holy, and all good things, which are similar to the characteristics Dr. Strobel talked about in class. My picture of God has not changed much, if anything I have become more in awe, especially in regards to the trinity. My idea of what a person is, something that was made in God’s own image but sinned, and what happens to humans when they die, the body will stay but the soul will spend eternity in heaven or hell, has also not changed much (Zukeran). After learning from Dr. Strobel... ...MI: Kregel Publications. Davis, K., & Clark, B. (2011). Kisses from katie: A story of relentless love and redemption. New York, NY: Simon and Schuster. Strobel, K. (2013), Classroom Lectures, State University, Phoenix, Az. Strobel, L. (2000). The case for faith: A journalist investigates the toughest objections to Christianity. Grand Rapids, MI: Zondervan Publishing House. Tackett, D. (n.d.). Why is a Christian worldview important?. Retrieved from http://www.focusonthefamily.com/faith/christian_worldview/why_is_a_christian_worldview_important.aspx Wilkens, S; Sanford, M. (2009). Hidden Worldviews: Eight Cultural Stories That Shape Our Lives. Downers Grove, IL, InterVarsity Press. Zukeran, P. (n.d.). what happens after death? a Christian perspective. Retrieved from http://www.probe.org/site/c.fdKEIMNsEoG/b.4224733/k.63A1/What_Happens_After_Death.htm Importance of Worldviews Essay -- Cosgrove, Reality Cosgrove describes a worldview as â€Å"a set of assumptions or beliefs about reality that affect how we think and how we live† (p. 19). A person’s worldview has been molded from the day they were born by family, friends, media, and even strangers. Worldviews are important because they allow us to â€Å"develop a deep comprehensive faith that will stand against the unrelenting tide of our culture’s non-biblical ideas† (Tackett). Our actions also tend to mimic our beliefs—for example, if you believe that there is life after death like Christians do, your priorities should reflect your dedication to follow Christ and not be of this world (John 15:19 NLT). As I have learned more and more about worldviews in this class, particularly a Christian worldview, I have the opportunity to look back on what my worldview was and how it has changed. Because I have grown up in a church, and been a Christian for as long as I can remember, I have always thought of myself having a Christian worldview. However, after this course, I have realized that I did not know some of the basic Christian foundations—I did know that God is the creator of all things and that he is and everything he did is love. In the church I learned God is loving, all-powerful, all-knowing, eternal, unchanging, holy, and all good things, which are similar to the characteristics Dr. Strobel talked about in class. My picture of God has not changed much, if anything I have become more in awe, especially in regards to the trinity. My idea of what a person is, something that was made in God’s own image but sinned, and what happens to humans when they die, the body will stay but the soul will spend eternity in heaven or hell, has also not changed much (Zukeran). After learning from Dr. Strobel... ...MI: Kregel Publications. Davis, K., & Clark, B. (2011). Kisses from katie: A story of relentless love and redemption. New York, NY: Simon and Schuster. Strobel, K. (2013), Classroom Lectures, State University, Phoenix, Az. Strobel, L. (2000). The case for faith: A journalist investigates the toughest objections to Christianity. Grand Rapids, MI: Zondervan Publishing House. Tackett, D. (n.d.). Why is a Christian worldview important?. Retrieved from http://www.focusonthefamily.com/faith/christian_worldview/why_is_a_christian_worldview_important.aspx Wilkens, S; Sanford, M. (2009). Hidden Worldviews: Eight Cultural Stories That Shape Our Lives. Downers Grove, IL, InterVarsity Press. Zukeran, P. (n.d.). what happens after death? a Christian perspective. Retrieved from http://www.probe.org/site/c.fdKEIMNsEoG/b.4224733/k.63A1/What_Happens_After_Death.htm

Test: History of Michigan

How many of them were foreign-born? A) B) 22% C) 14% 5. The earliest mining in Michigan was for what mineral? A) iron B) silver C) gold D) copper after conducting extensive surveying and geological studies that confirmed the existence of copper deposits throughout the Awaken Peninsula, who published a report in 1841 that changed the course of Michigan economic, political and social development? A) Henry Rowe Schoolmate B) Lewis Sacs C) Douglas Houghton D) Robert Rogers 7. The Public Improvement Act ran into problems because 1 837 was not an opportune time for Michigan to seek purchasers for bonds.How did President Andrew Jackson's â€Å"Specie Circular† policy make it even harder for Michigan to find potential investors? A) it demanded that land purchased from the government had to be sold in plots no smaller than 1 60 acres B) it demanded that land controlled by the government could only be purchased by white males who had been born in the United States C) it demanded that al l land purchased from the government be paid for in gold or silver D) it demanded that all land purchased from the government be paid for in paper money issued by specie-backed banks 8.Following the Civil War, copper reduction in Michigan soared from 25 million pounds in 1872 to a peak of 267 million pounds in 1916. During what years did Michigan lead the nation in copper output? A) 1900-1940 B) 1847-1887 C) 1916-1956 D) Present day (Michigan still is the nation's largest producer of copper) 9. What was the Annotation Boulder? A) a 1/2-ton Potatoes Stone discovered in the Upper Peninsula B) a 1 -ton piece of granite used the carve the capstone of the Michigan State Capitol Building C) a 2-ton piece of iron discovered sticking out of the ground at the base of Iron Mountain D) a 3-ton boulder made of pure copper 10.How did William A. Burt determine in 1844 that large deposits of iron ore were located in the Upper Peninsula? A) he tripped over a piece of iron ore that Was sitting expos ed on the surface B) he found large chunks Of iron ore stuck to the roots of a tree that blew over during a windstorm C) the needle of his magnetic compass kept spinning wildly whenever he walked over specific patches of ground D) Native Americans showed him samples of raw iron ore they had made into decorative ornaments 1 1 . When Michigan first became a state, its capital was Detroit.However, many felt that Detroit was dangerously lose to Canada if another war with England should break out. As a result, the capital was moved further west to a village in Ingram County. How did the capital city come to be called â€Å"Lansing? † A) a man named John Lansing donated 1 00 acres of land to the state for the purpose of constructing the capital city B) many of the settlers in the village were from Lansing New York, which was named after John Lansing, chancellor of New York from 1801-1810 C) the city was named after Edward Lansing, a noted Indian fighter during the War of 1812 D) th e city was named after Stevens T.Lansing, Michigan first territorial governor 12. An 1850, Michigan voters approved a new constitution, which for the first time granted voting rights to what group(s) of people? A) blacks B) aliens (foreign-born immigrants) and Indians who renounced tribal loyalties C) women D) free white men who did not own property 13. A person in 19th-century America who believed that the institution of slavery needed to be done away with was referred to as a/an: A) polygamist B) abolitionist C) suffragist D) secessionist 14. During the 1 sass and sass, a great era of reform swept across the UnitedStates. One issue in particular caused a great deal of excitement. It grew out of a movement called the Washington Society that had been founded in Baltimore, Maryland in 1840. What did its members advocate? A) the prohibition of alcohol (forbidding its manufacture, sale and consumption) B) abolition of slavery C) greater civil rights for women, including the right to vo te D) abolition of polygamy (as practiced by the Morons as well as by some Utopian communities elsewhere in the U. S. ) 15. The Michigan State Flag has a blue shield in the center with the word â€Å"Tubbier† printed on it.What was this word mean? A) Honor above all. B) I will defend. C) Victory or death. D) Truth and justice. 16. Michigan residents who were opposed to slavery organized a secret transportation system to assist escaped slaves reach free soil. What was this transportation system called? A) Freedom Trail B) Underground Railroad C) Michigan Canal Company D) Overland Cartage Company 17. What was the most difficult challenge Charles Harvey faced when trying to construct the Sault Set. Marie Canal so that ships carrying ore from Lake Superior could sail into Lake Huron?A) Indian attacks Harvey's work crews ere attacked by small but fierce bands of local Indians on at least five different occasions B) elevation Lake Huron was 22 feet lower than Lake Superior C) strik ing workers Harvey's workers, most of whom were immigrants who were ovenirked, underpaid and far from home, stopped working for three months until the were promised a raise in pay and better working conditions D) high water two years of record snowfalls plus months Of continual rainfall caused a situation where lake levels were so high that it was nearly impossible for Harvey's men to dig the channels for the proposed canal 18.Please match each term with the correct definition. Michigan politician who introduced the concept of â€Å"popular sovereignty† in 1848 during his unsuccessful bid to be elected President of the United States. B. Lewis Sacs an escaped slave in Detroit who was captured by slave catchers and about to be returned to Kentucky when a mob of whites and blacks attacked his captors, freed him, and then took him to Canada. E. Thornton Blackburn a Mormon who left Utah in 1848 moved with a group of followers to Beaver Island in Lake Michigan and established a col ony. He later proclaimed himself to be the island's king. A.Jesse James String a Detroit merchant who spent a small fortune trying to acquire the Annotation Boulder so he could charge people 25 cents to see it. D. Julius Leered a fierce anti- slavery proponent who came to Detroit in 1859 to hear Frederick Douglass speak. He then told Detroit abolitionists of his plan to start a full-scale slave revolt by raiding the arsenal at Harpers Ferry, Virginia (now West Virginia). C. John Brown 19. According to the facts listed on the graphic celebrating Michigan 17th birthday, Michigan has miles of Great Lakes shoreline. A) 2,288 miles B) I ,288 miles C) 3,288 miles D) 4,288 miles 0. N 1854, a new political party was formed In Jackson, Michigan. This new party sought to offer an alternative to the Democrats and the Whig who were then in power. What was this new party called? A) Know-Nothing B) Republican C) Free Soil D) Progressive 21 . During the 1 sass, what was the dominant political issu e in Michigan and the nation? A) the abolition of slavery across the nation B) prohibition of alcohol C) slavery and its extension into the Western territories D) restricting foreign immigration 22. Michigan used road building techniques that were used in other parts of the county with lots of trees.What type of road had a surface made of thick, flat wooded boards laid next to each other in a row to provide travelers with a smoother ride? A) corduroy road B) hewn plank road C) tree ford D) plank road (or highway) 23. A person in 19th-century America who believed that a man should be able to be married to more than one woman at a time was called a/an: A) abolitionist B) polygamist 24. Public lands were surveyed into townships, each of which measured 6 miles by 6 miles and consisted of 36 sections. Sections were then subdivided into smaller parts and sold to the public.If one section = 640 acres, how many cress were in a quarter quarter section? A) 320 acres B) 160 acres C) 80 acres D ) 40 acres 25. Where is the Annotation Boulder today? A) on display in the Michigan State Capitol Building in Lansing B) on display at the Smithsonian Institution in Washington, DC C) somewhere at the bottom of Lake Superior (it was lost when the ship taking the boulder from the Upper Peninsula to Detroit sank during a storm) D) it no longer exists–it was melted down during World War II to help the war effort 26. Some state legislators in Georgia are arguing that it's time to correct a mistake made by a surveyor 200 ears ago.Georgia claims that its border should extend about 1 mile further north to the 35th parallel (into what is now the state of Tennessee). What would Georgia gain if its northern border were to be changed? A) The resort communities of Gatlinburg and Seville (home of the Dolly's resort) would no longer be part of Tennessee, but sit in Georgia–thus bringing badly needed revenue from taxes and tourist dollars into the Georgia economy. B) Georgia would ha ve a share of the Tennessee River–a waterway with about IS times the flow of the river metropolitan Atlanta currently depends on for eater.C) Georgians total size (in square miles) would increase enough that Georgia could claim to be the largest southern state in the U. S. 27 . According to local legend, the healing powers of Mount Clemens' sulfur-rich mineral water first became known when: A) baseball legend, Babe Ruth–whose career looked like it was coming to an end because of arthritis in the player's shoulders and arms–hit three home runs in a single game after two weeks of treatments in a â€Å"Bath City† spa. B) Presidential A. Garfield was taken to Mount Clemens for treatments after he Was shot by a would-be assassin.C) a horse, suffering from old age and rheumatism, became rejuvenated by drinking and rolling in Mount Clemens' water. 28. An the 1 8305, canals provided an effective and affordable means of transporting freight and passengers. How did canal boats move up and down the canals? A) They were propelled by small steam engines called â€Å"donkey engines. † B) They were equipped with sails which caught the wind and propelled the canal boats through the water. C) Each canal boat had a crew of men who used long poles to push the canal boat through the water.D) The canal boats were attached y large ropes to a team of mules or horses on the shore which pulled the canal boat through the water. E) The canal boats were rowed by crews of men with large oars. 29. Mount Clemens' â€Å"Bath City† era ended when the â€Å"Arrears,† the city's last bath house, burned down in 1974. However, a company called Mineral Essentials is providing visitors with access to the city's healing waters today. How are they doing it? A) When a customer goes for a treatment, s/he sits in a tub into which powder distilled from Mount Clemens' water has been mixed with regular tap water.

Child Abuse and Maltreatment

â€Å"Nearly five children die every day in America from abuse and neglect,† according to Every Child Matters Education Fund (as cited by The National Children's Alliance, 2009). This goes to show that child abuse is a major issue in today’s modern society. In fact, statistics show that there are over 3 million reports of child abuse each year in the United States alone (â€Å"National Child Abuse Statistics,† n. d. ).While the definition of child abuse and neglect changes from state to state, it is defined by The Federal Child Abuse Prevention and Treatment Act (CAPTA) as, at minimum: Any recent act or failure to act on the part of a parent or caretaker which results in death, serious physical or emotional harm, sexual abuse or exploitation; or an act or failure to act which presents an imminent risk of serious harm. (â€Å"What is Child Abuse and Neglect? † 2008) Most states have also recognized four major types of abuse in which children may experience. It is very common for serious problems to arise from child maltreatment, and tend to cause long-term traumatization. When it comes to dealing with children in court who have been exposed to abuse, special precautions and procedures must be taken into account. All of these topics help to lend some insight as to how serious the issue of child abuse truly is in today’s society. To begin with, the four major types of child maltreatment are: neglect, physical abuse, sexual abuse, and emotional abuse.Neglect occurs when a parent, guardian, or other caregiver fails to provide for the basic needs of their child such as feeding them, offering shelter, getting them medical attention, providing the child with an education, or ignoring the child’s emotional needs. Physical abuse takes place when someone such as a parent, guardian, or other caretaker intentionally causes physical harm to a child in various ways such as punching, kicking, biting, beating, stabbing, shaking, throwing , hitting, or choking.Sexual abuse includes different activities such as rape, sodomy, incest, indecent exposure, exploitation through prostitution or the production of pornographic materials, or fondling a child’s genitals (â€Å"What is Child Abuse and Neglect? † 2008). While boys and girls do face fairly equal amounts of physical abuse and neglect, it is four times more likely for a girl to experience sexual abuse than a boy (Bartol ; Bartol, 2012, p. 379). According to CAPTA, sexual abuse is defined as: the employment, use, persuasion, inducement, enticement, or coercion of any child to engage in, or assist any other erson to engage in, any sexually explicit conduct or simulation of such conduct for the purpose of producing a visual depiction of such conduct; or the rape and in cases of caretaker or inter-familial relationships, statutory rape, molestation, prostitution, or other form of sexual exploitation of children or incest with children. (â€Å"What is Child Abuse and Neglect? † 2008) Lastly, emotional abuse is described as acts or behaviors which negatively affect a child’s sense of self-esteem or self-development.This can be caused from constant criticism, rejecting the child, threatening them, or withholding love, guidance, and emotional support. However, it is very difficult to prove that a child has been emotionally abused without evidence of harm or mental injury. (â€Å"What is Child Abuse and Neglect? † 2008). Out of all these different types of maltreatment, neglect is by far the most common. According to the U. S. Department of Health and Human Services (2010), â€Å"over two-thirds (70%) of maltreatment victims experience neglect. About 15% are physically abused, and 9% are sexually abused.Only 7% reportedly are emotionally abused, a figure that is probably greatly underestimated† (as cited in Bartol ; Bartol, 2012, p. 378-379). While these four types of child maltreatment are the most common, ther e are several other well-known examples of child abuse as well. According to Emery and Laumann-Billings (1998), â€Å"an estimated 1,200 to 1,500 young children are murdered each year by a parent or other person,† (as cited in Bartol ; Bartol, 2012, p. 380). This form of infant abuse is known as infanticide, or the killing of an infant up to two years of age (Bartol ; Bartol, 2012, p. 80). According to data from the National Child Abuse and Neglect Data System (NCANDS), children younger than 1 year accounted for 46. 2% of child fatalities in 2009 (as cited in the Child Welfare Information Gateway, 2011). Infanticide can be broken down further into two terms, neonaticide and filicide, depending on how long after birth the child was killed. For example, if a new-born baby is killed within 24 hours after his birth, it would be neonaticide. If the child is killed after he reaches the age of one year, it would be filicide.These two terms exist because of the substantial difference s between mothers who commit neonaticide and those who commit filicide. Shaken baby syndrome is another form of child abuse in which the parent, guardian, or caretaker shakes the baby so hard that serious brain damage occurs (Bartol ; Bartol, 2012, p. 383). Several common symptoms of shaken baby syndrome are seizures, inability to lift head, difficulty breathing, difficulty speaking, blindness, lethargy/decreased muscle tone, extreme irritability, or inability of eyes to focus or track movement (â€Å"The National Center on Shaken Baby Syndrome,† n. . ). In some cases, death may even occur. According to Russell (2010), â€Å"of those children diagnosed with SBS, about 30% die as a result of their injuries, and only 15% survive with no lasting effects (as cited in Bartol ; Bartol, 2012, p. 383). Not only are children affected while the maltreatment is happening, but the memories of the abuse can have negative consequences for children, families, and society that last lifetime s, if not generations. First of all, a person’s physical and mental health could be negatively affected.For instance, adults who have been physically abused or neglected are more likely to be suffering from asthma, arthritis, high blood pressure, bronchitis, and many more. Some mental effects of abuse could be a mental disorder, depression, isolation, fear, an inability to trust, anxiety, and so on. Additionally, people who have been abused in the past have much higher chances of committing violent crimes and becoming juvenile offenders (â€Å"Long-Term Consequences of Child Abuse and Neglect†, n. d. ).According to English, Widom, ; Brandford (2004), â€Å"a National Institute of Justice study showed that abused and neglected children were 11 times more likely to be arrested for criminal behavior as a juvenile, 2. 7 times more likely to be arrested for violent and criminal behavior as an adult, and 3. 1 times more likely to be arrested for one of many forms of violent crime (juvenile or adult),† (as cited in â€Å"Long-Term Consequences of Child Abuse and Neglect†, n. d. ). Additionally, adults who were abused by their parents when they were kids are very likely to abuse their own kids.A lot of people who faced abuse are also very likely to have problems with drug abuse in their future (â€Å"Long-Term Consequences of Child Abuse and Neglect†, n. d. ). Suicidal thoughts and attempts to commit suicide are also very common among victims of child abuse. Lastly, child maltreatment is very expensive for society. These costs include direct costs which are the costs associated with the immediate needs of the abused and neglected child, and indirect costs which are the costs associated with the longer term and the secondary effects of child maltreatment.Some examples of direct costs would be hospitalization, child welfare, law enforcement, chronic health problems, and is estimated annually to cost over 24 million dollars. Some exampl es of indirect costs would be special education, adult criminality, juvenile delinquency, mental health, health care, and the estimated annual cost is around or over 69 million dollars. Together, the total of the direct and indirect costs for people who have suffered from child abuse can be around 90 million to 100 million dollars yearly (â€Å"Chapter Six: What Are the Consequences of Child Abuse and Neglect? n. p. ). Finally, special procedures and precautions must be taken when dealing with abused children in the courts. This is where the forensic psychologist may become involved. Some of the issues the forensic psychologist may be involved with is figuring out the most appropriate procedure for taking the child’s testimony, finding out under what conditions would a child’s out-of-court statement (hearsay) be admissible, figuring out if the child is competent enough to provide an accurate testimony in the court of law, and if abuse or neglect occurred, and if so, w ho is responsible.The first issue is very important because it is very common for the child to be under enormous duress in the presence of the defendant, or the child’s possible abuser. The child is under even more pressure if they have to testify against their own parent or guardian. According to Partlett and Nurcombe (1998), The child is notoriously vulnerable while giving evidence against abusers, especially parents, when proof of the charge will result in separation. Many children are highly susceptible and subject to recantation when faced with the reality of parental separation (as cited in Bartol ; Bartol, 2012, p. 91-392). In order to solve this issue, many states have made and passed recent legal rules which limit the defender’s confrontation with the child by allowing the child’s testimony to be taken through closed-circuit TV, or another room. Another tricky part of abused children and courts is the child evaluation. When evaluating the children, the clinicians have to be very careful and have to be very sensitive and skillful to a wide range of factors. The evaluator should also try to avoid tating their personal opinions when with the child. K. S. Budd, Felix, Poindexter, Naik-Polan, and Sloss (2002), report that Clinicians may be asked to assess the child’s developmental or emotional functioning and needs, the effects of maltreatment on the child, the risk of harm should the child be united with his or her parents, the impact of separation from the biological family on the child’s functioning, or the advantages and disadvantages of potential visitation or placement options (as cited in Bartol ; Bartol, 2012, p. 80). Lastly, in some cases it may be necessary for the courts to appoint someone to represent the child such as a guardian ad litem (GAL), to represent the child’s best interests or if the child cannot do so by themself. Two responsibilities of the child’s GAL is to get a clear understanding of the situation and the needs of the child, and to make recommendations to the court concerning the needs of the child (â€Å"Representation of Children in Child Abuse and Neglect Proceedings,† n. p. ).Overall, child abuse is a serious issue in today’s society. â€Å"In 2009, Children’s Advocacy Centers around the country served over 254,000 child victims of abuse, providing victim advocacy and support to these children and their families. In 2010, this number was over 266,000† (National Children’s Alliance, 2010). Everyday children are exposed to child abuse and everyday children die from it. Will there ever be a day when children don't have to be afraid of the abuse? Probably not; and that is the twisted society in which we live today.